Kenwood X5001-1

$459.00

Class D Mono Power Amplifier

  • Max Power 1000W
  • RMS 300W (4Ω)
  • RMS 500W (2Ω)
  • Size (W) 213mm x (H) 53mm x (D) 149mm
  • Variable Low Pass Filter
  • Bass Boost
  • Infrasonic Filter
  • Optional Wired Remote Ready

Output Coil with Magnetic Shield

Prevents magnetic flux from radiating from the subwoofer’s coil, resulting in reduced noise and enhanced sound quality.

High Quality Capacitors

PMLCAP’s (Polymer Multi-Layer Capacitors) are utilized in the LC filter circuits to decrease distortion, ensuring clear detail for a truer to life sound.

Infrasonic Filter (ISF)

When the Infrasonic Filter Switch is turned on, the amplifier cuts off the low frequencies below 25Hz, which makes the amplifier’s power supply and output devices more efficient, providing clear bass output.

Gauge-style terminals lock wire
into position with set screw for secure installation.

One-side Connection

All terminals and connections are on one side foreasier installation and a cleaner look.

  • ①Fuse (30A x2)
  • ②Battery terminal (POWER IN BATT.)
  • ③Power control terminal
  • ④Ground terminal (GND)
  • ⑤Speaker output terminals
  • ⑥Remote terminal
  • ⑦Speaker level input terminal
  • ⑧Line in terminal
  • ⑨Input sensitivity control
  • ⑩Infrasonic filter switch
  • ⑪Bass Boost Level control
  • ⑫LPF frequency control

Speaker Level Input Harness

Speaker Level Input Harness is included to connect to speaker wires from factory installed receivers.

Optional Wired Level Control Ready

KCA-RC01A Optional wired remote level control allows you to easily adjust the subwoofer volume.

General Features

Amplifier Tech-Spec X8001-5 X5001-1 X3001-4
Maximum Output Power 1600W 1000W 600W
RMS Power at 4ohms 50W x 4ch +300W 300W 50W x 4ch
RMS Power at 2ohms 75W x 4ch +500W 500W 75W x 4ch
Bridged at 4ohms 150W x 2ch +300W 150W x 2ch
Frequency Response 20Hz – 50kHz 20Hz – (Upper Frequency is depends on Low Pass Filter) 20Hz – 50kHz
High Pass Filter 50Hz – 200Hz, -12dB/oct. 50Hz – 200Hz, -12dB/oct.
Low Pass Filter 50Hz – 200Hz, -24dB/oct. 50Hz – 200Hz, -24dB/oct. 50Hz – 200Hz, -12dB/oct.
Infrasonic Filter Yes
Speaker Level Input Yes Yes Yes
Signal Sensing Turn-on Yes Yes Yes
Signal to Noise Ratio 90dB 100dB 90dB
Dimensions (W x D x H)mm 248 x 169 x 53 213 x 149 x 53 213 x 149 x 53
Weight 2.1kg 1.5kg 1.4kg
Scroll to Top